DIN2445 ST37.4 ST44.4 ST52.4 Stiel buis piip
Produkt Detail
ST37.4 ST44.4 ST52.4 Steel Grade Seamless Steel Tube foar dynamyske ladingen Normale druk 100 oant 400 bar is ús bedriuw benammen produkt.It wurdt in soad brûkt yn swiere frachtweinen, militêre yndustry, spoarlokomotyf, motor yntsjinne en de gas line yn spesjale vehicle.They koe foldwaan oan de easken fanwege hege presyzje fan Out diameter en Binnendiameter.Ek syn anty corrosie prestaasjes.
Spesifikaasje
| Standert | DIN 2445 DIN 1630 DIN 2448 |
| Klasse | ST37.4 ST4.4 ST52.4 |
| Levering Betingst | NBK(+N) BK(+C) GBK(+A) BKW(+LC) BKS(+SR) |
| Grutte | OD: 4 oant 219 mm Dikte 0.5-20 mm, Lingte: 3m, 5.8,6 of neffens easken |
| Ein | 1.Bare Tube (Gjin coating): Helder en glêd 2.Galvanisearre oerflak (Sliver / Yellow / Colourful) Sink coating fan 8-12um 3.Swart fosfaat |
| Oanfraach | Hydraulic systeem;auto/bus;konstruksje vehicle |
| Levertiid | A.3 dagen as dit goed is stock guod. B. Ungefear 30 dagen neffens de kwantiteit |
| KOUDE DRAWN SEAMLESS STEEL TUBE | |||
| Standerts | Steel Grades | Grutte Range | |
| DIN | 2391 | ST35/45/52 | OD4 - 219mm × WT0.3 -20mm |
| 1629 | ST37/44/52 | OD4 - 219mm × WT0.3 -20mm | |
| 1630 | ST37.4/44.4/52.4 | OD4 - 219mm × WT0.3 -20mm | |
| 2445 | ST35/ST52/ST37.4//52.4 | OD4 - 219mm × WT0.3 -20mm | |
| 73000 | ST 35 / 45 / 52 / 37.4 / 44.4 /52.4 | OD3 - 30mm × ID 1 - 12,5 mm | |
| GB/T | 8162 | 10/20/16Mn/35/45/30CrMo/ | OD4 - 219mm × WT0.3 -20mm |
| 8163 | 10/20/16Mn/35/45/30CrMo | OD4 - 219mm × WT0.3 -20mm | |
| 3639 | 10/20/16Mn/35/45/30CrMo | OD4 - 219mm × WT0.3 -20mm | |
| 3093 | 10/20/16Mn/35/45/30CrMo | OD3 - 30mm × ID 1 - 12,5 mm | |
| EN | 10305-1 | E215/235/255/355 | OD4 - 219mm × WT0.3 -20mm |
| 10305-4 | E215/235/255/355 | OD4 - 219mm × WT0.3 -20mm | |
| ASTM | A822-A450 | A822 | OD4 - 219mm × WT0.3 -20mm |
| A179-A450 | A179 | OD4 - 219mm × WT0.3 -20mm | |
| A519 | 1010/1015/1025/1030/1045/ 4130 / 4140 / ensfh | OD4 - 219mm × WT0.3 -20mm | |
| SAE | J524 | Low koalstof stiel | OD4 - 219mm × WT0.3 -20mm |
| J529 | Low koalstof stiel | OD3 - 30mm × ID 1 - 12,5 mm | |
| JIS | G3445 | STKM11A/12A/12B/12C/13A/13B | OD4 - 219mm × WT0.3 -20mm |
| G3455 | STS35/38/42/49 | OD3 - 30mm × ID 1 - 12,5 mm | |
| ISO | 8535 | ST 35 / 45 / 52 / 37.4 / 44.4 /52.4 | OD3 - 30mm × ID 1 - 12,5 mm |
| NF | A49-310 | TU37b/TU52b | OD4 - 219mm × WT0.3 -20mm |
| BS | 3602 | CFS 360 | OD4 - 219mm × WT0.3 -20mm |
| 6323(-4) | CFS2/CFS3/CFS4/CFS5 | OD4 - 219mm × WT0.3 -20mm | |
| ASTM | A269 | 304,304L, 316, 316L | OD4 - 219mm × WT0.3 -20mm |
| EN | 10216-5 | 1.4401, 1.4404 | OD4 - 219mm × WT0.3 -20mm |
Oanfraach
1. Automotive fjilden
A. Fuel ynjeksje rigels / nozzles
B. CNG (Compressed Nature Gas) buis-- Burst druk: 1307 bar, wurkdruk: om 350 bar
C. Drive transmission: Steering kolom eleminten
D. Gearassen, hânrem, foarassen, airbag-inhalators, stabilisatoren, stoelbefestigingen, assen foar oandriuwing foar foarwielen
2. Hydraulic Fields
A. Hydraulic circuits (HPL), pneumatyske linen, en hydraulyske ophinging
B. Hydraulyske silinders (HPZ)
Kwaliteitsfersekering
1. Strikt neffens DIN2391 / EN10305 of oare standert.
2. Sample: Sample is fergees foar test.
3. Tests: Salt spray test / Tensile test / Eddy current / Chemical gearstalling test neffens klanten 'fersyk
4.Sertifikaat: IATF16949, ISO9001, SGS ensfh.
5.EN 10204 3.1 Sertifisearring
Produkt ferpakking
